Rock, Root & Tree Grapples GR-M
Approx. 20-50 horsepower
ANBO GR-M (Medium) are designed specifically to fit compact and mini-tractors with good lifting ability.
The GR-M series has sizes similar in weight to the GR-L but provides a larger payload than the standard GR-L to compliment the increase lift capability of some of the small compact tractors. Like all the ANBO grapples, the GR-M uses a special steel with a Brinnell rating (resistance to abrasion) more than 50% better than T1 and a Yield rating (resistance to bending) almost twice that of T1. The product can be used to rake, material, dig out roots and rocks, move trees, brush and debris without picking up dirt. The design minimizes weight and preserves lift capacity but still delivers on the strength, durability and versatility.
"I have had the GR-M attached to my Kubota L3540 for a couple of weeks now
and very impressed. I figured I would have to baby the unit because it is
lighter weight and I wanted to stay that way because I have 1400 lb loader
at the end of bucket. Well let me say that it is one tough unit and very
impressed with the type of steel used and its ability to withstand banging
around large logs. I had a potential customer call me and ask me how I
liked it and told him I like it much better than expected."
A grapple width that is similar in width as the bucket, and/or at least as wide as the tires or tracks, is recommended. For fence-line and building raking, consider one that is slightly wider than the tires or tracks. All sizes are approximate. (Other standard and heavy duty size grapples are also available).
Allow for variations in soils and will affect the weight and cost. Weights are approximate and vary according to the grapple size, tine thickness, type of mounts and coupler. The 6” spacing is the most popular due to finer raking capability.
Weights shown are based upon 6” spacing. Estimate 6% less weight for 8” and 15% less for 12” tine spacing. Due to variations in manufacturers, the weights shown do not include mounts or hoses and couplers which are quoted separately for each
Product weight and pricing does include the mounts. All mounts are quoted separately..
Heavy duty 3000 PSI welded cylinders for added strength and durability.
All items are per ANBO’s standard 1 year parts and labor warranty.
No other warranties are given or implied.
Give us a call and find out more (1-866-684-3330).
8 am to - 8pm Eastern
Standard Time (EST).
||The GR-M grapples feature a special
design for increased payload.
The unit mounts closer to the loader
arms, has a high capacity cage, but
still has the strength for raking, and
digging up and carrying roots, rock
||The tines are made of special alloy steel (50% stronger than T1).
Tines are individually notched and welded to the main frame tube.
||Cylinders are dual 3000 psi for superior holding power.
ANBO only uses heavy duty welded cylinders with extra large shaft
All pivots are greaseable.
Grapple tines are individually notched and welded to the main frame.
||The teeth mesh together to hold loads tightly and can effectively push material that is as small as 3 inches.
This enables fine raking forward
All items are subject to change without notice. ANBO's Standard 1 year parts and labor warranty are included.
No other warranties are implied.
Read more about ANBO Manufacturing product warranties here...
Back to Rock, Root & Tree Grapples overview